1/4 Turn PEX Angle Stops, 1/2" Crimp PEX B x 3/8" OD Compression Heavy Pattern Bar Stock Miiflex Heavy Duty Chrome Plated Brass Quarter Turn Shut Off Valve [5 Pack]

This (5) pack heavy duty, single-mold cast body, heavy pattern bar stock, quarter turn angle stop chrome-plated lead free brass valve with ferrule and nut is made for long-lasting durability and heavy duty usage where a 1/2 inch crimp PEX B inlet x 3/8 inch OD comp outlet is required. Use in potable and non-potable plumbing and water distribution systems.

• [VALUE] This quarter turn valve comes in a contractor 5 pack with ferrule and nut to provide you multiple installs in your entire house or project.
• [PREMIUM QUALITY] This product was crafted in a single-mold body heavy duty design. The premium quality lead-free brass can withstand harsh usage and repetition while continuing to maintain its’ integrity. Every valve is leak-free as controlled by the factory during the manufacturing process. The zinc-plated lever adds a modern appearance and is practical to use.
• [VERSATILITY] The angle stop valve is great for residential DIYers, renovators, plumbers, and installers in commercial projects such as schools, office buildings, apartments, hotels, laboratories, and public buildings.
• [APPLICATIONS] Use as water supply control shut off valves for kitchen, bathroom, restroom, faucet, toilet, sink, vanity, dishwasher, basin, water filtration systems, laboratory stations, etc.
• [COMPLIANCE] High quality, shiny chrome-plated brass made from lead free compliant material and certified by UPC.
• [EASY and QUICK INSTALLATION] Use a PEX tool to crimp a PEX B ring onto the barbed PEX B inlet end for a water tight connection. (PEX rings not included).

Note to installer:

This heavy duty valve is machined and crafted with very high precision; leaks after installs are very rare. If leaks do occur, most likely it is due to an incorrect installation method. Follow this guidance during install:

- DO NOT reuse old ferrule and nut. Remember to remove existing ferrule and nut from previous valve as this may cause improper seal and potential catastrophic flood to the property.

- DO NOT overtighten the nut as this will deform the compression ring and cause a leak.

- DO NOT use on copper stub-out that has been deformed or has uneven surface.

Product Disclaimer:

P65 warning requires products sold in the State of California to display a warning label indicating any traces of chemicals known to the State to cause birth defects or other reproductive harm. Although this product is listed as "lead free/low lead", it only pertains to the material of the area where potable water runs through/touches. Other areas such as the handle may still have minute traces of lead and has to be indicated per P65 Warning.